| (1) |
SHAFTLESS
MILL ROLL STAND (MRS-3V) |
| A. |
MAX. PAPER
WIDTH : 1,400 DIA. ¡Ñ 1,450L mm |
| B. |
HYDRAULIC
POWERED ALIGNING AND CORING ATTACHED 5 HP HYDRAULIC. |
| C. |
HYDRAULIC
RAISING AND LOWERING. |
| D. |
COMPLETE SET
OF ELECTRIC CONTROL. |
| E. |
BY
HAND-OPERATED BRAKES. |
| F. |
ATTACHED WITH
2 UNITS OF TROLLEYS WITH TRACKS. |
|
|
| (2) |
PRE-HEATING
ROLL (PH-2) |
| A. |
PREHEATING
CYLINDER :
DIA. 600 mm-- 2 PCS |
| B. |
FIXED GUIDING
ROLL :
DIA. 88
mm-- 4 PCS |
|
|
| (3) |
SINGLE
FACER (SF-3AL) |
| A. |
FLUTE : EF
PITCH 3.6 mm HEIGHT 1.5 mm |
| B. |
UPPER &
LOWER ROLL : 252 mm DIA. MADE BY HARDENED SPECIAL |
|
ALLOY STEEL AT
HARDNESS OVER (HRC
53¡ã56¢X)
SURFACE CHROMED. |
|
C.
|
PRESSER
ROLL : 260 mm DIA. MADE BY CARBON-STEEL, SURFACE CHROMED. |
| D. |
DOCTOR
ROLL : 196 mm DIA. MADE SFT-STEEL, SURFACE CHROMED. |
| E. |
APPLICATOR
ROLL : 98 mm DIA .MADE BY SOFT-STEEL, FOR GLUE. |
| F. |
PREHEAT
ROLL : UPPER ROLL - 300 mm DIA. LOWER ROLL - 350 DIA. MADE BY STEEL
TUBE. |
|
G.
|
FINGERLESS
: BY MEDIUM ROLL SUCTION & FINGERLESS TYPE. AS NO-NEED TO REGULATING THE GLUE. EASY TO
OPERATE. |
|
H.
|
EQUIPPED
ELECTRIC SENSOR, THE MACHINE WILL STOP AUTOMATICALLY,
PRESSURE ROLL & APPLICATOR ROLL WILL LEAVE TO AVOID
THE VACUUM PUMP DRAW THE GLUE. |
| I. |
MAIN MOTOR
: 1 SET OF 15HP V.S. MOTOR |
| J. |
VACUUM PUMP
: 1 SET 10 HP MOTOR |
| K. |
FLUTE
ROLL & PRESSURE ROLL USING FORCIBLE FEEDING OIL SYSTEM TO KEEP
THE FUNCTION OF BEARING. |
|
|
|
|
| (4) |
SINGLE
FACER CUTTER (SFC-3) |
| A. |
WIDTH OF
MACHINE : 1,450mm |
| B. |
SPEED OF
MACHINE : 100M/min. |
| C. |
MAX. CUTTING
LENGTH : 1,400mm |
| D. |
MIN. CUTTING
LENGTH : 330mm |
| E. |
THE
LENGTH OF CUTTING SET-UP BY ELECTRICALLY AND INDICATING
BY A PRECISION
PANEL. |
| F. |
USING
PRECISION GRINDING GEAR, CUTTING PRECISION EFFECT ON ¡Ó 1
mm. |
| G. |
LUBRICATING
SYSTEM USING EXCUTE-FEEDING (PUMP), TO EXTEND THE LIFE
OF THE GEAR. |
| H. |
USING A
ELECTRIC COUNTER TO INDICATING THE VOLUME OF THE PAPER. |
| I. |
PAPER LATERAL
IS OPERATE BY ELECTRICALLY. |
|
|
| (5) |
GLUE MAKING
& RECYCLE EQUIPMENT |
| A. |
MAIN GLUE TANK
: 600 L. WITH 1 SET OF 3 HP REDUCER. |
| B. |
STORAGE TANK :
600 L. --- 1 PC |
| C. |
RECYCLE TANK :
200 L. --- 1 PC |
| D. |
PUMP
: 1" ¡Ñ 1 HP M.
IN 1 SETS. |
|
|
